Genesis GHD1260B Use and Care Manual download pdf (Page 7)

English

KNOWING YOUR HAMMER DRILL

UNPACKING AND CONTENTS

IMPORTANT: Due to modern mass production techniques, it is unlikely the tool is

faulty or that a part is missing. If you ﬁnd anything wrong, do not operate the tool until

the parts have been replaced or the fault has been rectiﬁed. Failure to do so could result

in serious personal injury.

CONTENTS IN PACKAGE

Description Q'ty

Hammer Drill 1

Auxiliary Handle 1

Depth Gauge 1

Chuck Key 1

Operator's Manual 1

OPERATION

WARNING: Always check that the power supply corresponds to the voltage

on the rating name plate.

WARNING: Always be sure that the tool is switched off and unplugged

before adjusting, adding accessories, or checking a function on the tool.

SWITCH TRIGGER

Your tool is equipped with a variable speed switch trigger (1-FIG1). The tool speed is controlled by the amount of

pressure you apply to the switch trigger. By slowly increasing the pressure on the switch trigger, tool speed will

gradually increase until reaching maximum rated RPM.

1. Switch Trigger

2. Lock-ON Button

3. Forward/Reverse Lever

4. Speed Control Dial

5. Mode Selector

6. Chuck

7. Auxiliary Handle

8. Depth Gauge

9. Chuck Key

FIG 1

1 2 3 4 5 6 7 8 9 10 11 12 ... 35 36

No comments

Genesis GHD1260B Use and Care Manual Page 7