Genesis GCQD38A Use and Care Manual download pdf (Page 3)

English

WARNING: Read and understand all warnings, cautions and operating

instructions before using this equipment. Failure to follow all instructions listed below

may result in electric shock, ﬁre and/or serious personal injury.

SAVE THESE INSTRUCTIONS

WORK AREA SAFETY:

• Keep your work area clean and well lit.

Cluttered benches and dark areas invite accidents.

• Do not operate power tools in explosive atmospheres, such as in the presence of

ﬂammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.

• Keep bystanders, children, and visitors away while operating a power tool.

Distractions can cause you to lose control.

ELECTRICAL SAFETY

• Power tool plugs must match the outlet

. Never modify the plug in any way. Do not use any

adapter plugs in any earthed (grounded) power tools. Double insulated tools are equipped with a polarized

plug (one blade is wider than the other). This plug will ﬁt in a polarized outlet only one way. If the plug does not

ﬁt fully in the outlet, reverse the plug. If it still does not ﬁt, contact a qualiﬁed electrician to install a polarized

outlet. Do not change the plug in any way. Double insulation eliminates the need for the three wire grounded

power cord and grounded power supply system.

• Do not expose power tools to rain or wet conditions. Water entering a power tool will

increase the risk of electric shock.

• Avoid body contact with earthed or grounded surfaces such as pipes,

radiators, ranges and refrigerators

. There is an increased risk of electric shock if your body is

grounded.

• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep

cord away from heat, oil, sharp edges or moving parts. Damaged cords increase the risk of electric shock.

• When operating a power tool outside, use an extension cord suitable for

outdoor use.

These cords are rated for outdoor use and reduce the risk of electric shock.

• Do not use AC only rated tools with a DC power supply. While the tool may appear to

work. The electrical components of the AC rated tool are likely to fail and rate a hazard to the operator.

PERSONAL SAFETY

• Stay alert

, watch what you are doing and use common sense when operating a power tool. Do not use

tool while tired or under the inﬂuence of drugs, alcohol, or medication. A moment of inattention while operating

power tools may result in serious personal injury.

• Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid

safety shoes, hard hat, or hearing protection for appropriate conditions will reduce personal injuries.

• Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from

moving parts. Loose clothes, jewelry or long hair can be caught in moving parts. Air vents may cover moving

parts and should be avoided.

• Avoid accidental starting. Ensure the switch is in the off position before plugging in. Carrying power

tool with your ﬁnger on the switch or plugging in power tools that have the switch on invites accidents.

• Remove any adjusting keys or wrenches before turning the power tool on. A

wrench or key that is left attached to a rotating part of the tool may result in personal injury.

• Do not overreach. Maintain proper footing and balance at all times. Loss of balance can cause an injury

in an unexpected situation.

• If devices are provided for connection of dust extraction and collection

facilities, ensure these are connected and properly used. Use of these devices can

reduce dust related hazards.

1 2 3 4 5 6 7 8 ... 31 32

Comments to this Manuals

No comments

Genesis GCQD38A Use and Care Manual Page 3

Comments to this Manuals

Related products and manuals for Power drills Genesis GCQD38A