Genesis GCQD38A Use and Care Manual download pdf (Page 6)

English

3/8" Close-Quarter Drill

Operator’s Manual GCQD38A

• Always check that the material being drilled is secure and clamped in place

if necessary to prevent any movement. An unstable workpiece can cause the drill bit to bind, causing of control

and injury.

• Never hold the workpiece in your hand, lap or against other parts of the

body when drilling. Contact with the drill bit can cause injury.

• Always position the cord away from the rotating bit and DO NOT wrap the

cord around your arm or wrist. If the cord is caught by the rotating bit or chuck you may lose

control of the drill and become entrapped by the cord, causing personal injury.

• When using the drill, DO NOT position yourself between the tool and a wall

or post. If the bit jams or becomes bound in the workpiece, the sudden reaction torque of the tool could

crush your hand, arm or leg against a stationary object.

• If the bit jams or binds in the work, immediately release the switch trigger to prevent personal

injury. Unplug the drill from the power source and then remove the drill bit from the work. Do not attempt to

free the jammed drill bit by repeatedly starting and stopping the drill motor; this action could result in injury.

• Do not use dull or damaged bits and accessories. Dull or damaged bits are more likely

to bind in the workpiece.

• Do not use bits larger then those recommended. They are more likely to jam, causing

loss of tool control and personal injury. Large bits may also overload the drill, causing motor and gear damage.

• When removing the drill bit from the tool avoid contact with skin. Allow sufﬁcient

time for the bit to cool down or use proper protective gloves to handle the bit or accessory. Drill bits and

accessories may be hot after prolonged use.

WARNING: USE OF THIS TOOL CAN GENERATE AND DISBURSE DUST OR

OTHER AIRBORNE PARTICLES, INCLUDING WOOD DUST, CRYSTALLINE SILICA DUST

AND ASBESTOS. Direct particles away from face and body. Always operate tool in a

well-ventilated area and provide for proper dust removal. Use dust collection system

wherever possible. Exposure to the dust may cause serious and permanent respiratory

or other injury, including silicosis (a serious lung disease), cancer, and death. Avoid

breathing the dust, and avoid prolonged contact with the dust. Allowing dust to get into

your mouth or eyes, or lay on your skin may promote absorption of harmful material.

Always use properly ﬁtting NIOSH/OSHA approved respiratory protection appropriate for

dust exposure, and wash exposed areas with soap and water.

SAVE THESE INSTRUCTIONS

1 2 3 4 5 6 7 8 9 10 11 ... 31 32

No comments

Genesis GCQD38A Use and Care Manual Page 6